본문 바로가기
2017.09.13 03:33

KODY-N302 설명서

조회 수 190 추천 수 0 댓글 1
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄 첨부
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄 첨부

kody1.jpg

사용 전에 카메라와 플래시뿐만 아니라 설명서의 사용법을 완전히 읽고 이해해야 만이 항목의 작동과 올바른 사용법을 알 수 있습니다
sayong jeon-e kamelawa peullaesippunman anila seolmyeongseoui sayongbeob-eul wanjeonhi ilg-go ihaehaeya man-i hangmog-ui jagdong-gwa olbaleun sayongbeob-eul al su issseubnida

 

kody2.jpg

 

kody3.jpg

 

kody4.jpg

 

kody5.jpg

 

kody6.jpg

 

kody7.jpg

 

kody8.jpg

 

kody9.jpg

 

  • ?
    관리자 2017.09.14 12:50
    [usb socket] only used for the internal update software

    [3.5mm socket] output flash trigger signal can use to connect stydio loghts and outdoorlights.

    [Battery compartment] Install 2pcs of AA battery


    [Hot shoe] Connect to camera.

    [Foxed Screw] Fix the products on the camera.

    [Battery compartment] Install 2pcs of AA battery

    [1/4 screw nut] Connect to tripds or stands.

    [usb socket] only used for the internal update software

    [Group option switch] A,B,C three channels for option,D is for future use.




    Product name of Each part
    Transmitter
    [A/B/C Setup]Press this key under standby mode, Quick access the switch forTTL,M,OFF mode for A/B/C group.

    [Hot Shoe] Connect to your flash

    [Eyelet] Fix the device

    [Power switch]Push [] to power on, Push [] to power off


    [+]Add a level
    [-] Reduce a level
    [S] Group function set button, you can press[+]
    [-] to change the setip of A/B/C group after press[S]

    [] Sync switch, Hi-speed and 2nd curtain sync, When no display, the defult is 1st curtain sync.

    []Swich to TTL ratio or TTL and M output by pressing this button.

    []Menu button, under the stand-by mode, you can enter the menu set mode by pressing this button.

    [] Test flach button

    [LED 2 colors indicator] Blue lighs means normal communication. Red lights means sending ghe signal.



    Receiver

    [LED 2 colors indicator Blue lighs meanss well received TX signal. Red lights means output flash trigger signal.

    [Test Button] Perss this button, the flash attached in the device will flash

    [Hot shoe] Connect to flash

    [Eyelet] Fix the device

    [3.5mm socket] Output flash trigger signal can use to connect studio lights and iutdoor lights

    [PC socket] output flach trigger signal

    [Power switch] Push [] to power on Push [] to power off

    [Channel switch] 1 CH, 2CH,3CH, AUTO.



    Specifications:

    System Mode : Digital FSK2.4 GHz
    Distance Range : 400M+
    Channel : Transmitter: 15Fixed Channels and 1 Auto Channel
    Receiver: 3 Fixed Channels and 1 Auto Channel
    Power : Transmitter : 2.4 - 3.3 V (AA X 2pcs); Rdceiver : 4 - 3.3 V ( AA X 2pcs)
    antenna : Built-in wire antenna
    Sync Speed : 1/8000s (different camera and flash models will differ)
    Shutter Release : Support Shutter releases
    Control : Transmitter : 5 Different groups; Receive; 4 Different groups
    Interface : 3.5MM, USB 2.0 PC
    Test Flash : support
    Function : Support EOS E-TTL ll flash mode, manual iutput.
    Battery Life : Transmitter; Approc. 600hrs inder stand-by mode
    Receiver; Approx. 240hrs inder stand-by mode
    Display : LCD screen


    Installation :

    Intallation for Transmitter:

    1. Inseret the board screw on the tranmitter fixed screw as [1-1], lock the board screw on the tripods as [1-2]
    2. Make sure the flash is powered off before attaching your flash to the transmitter hot shoe as [1-3], Lock you flash as illustrated on [1-4]

    Installation for Receiver

    1. Make sure the camera is ppowered off, Loose the fkxed screw of receiver hot shoe by rotating right, insert the erceiver on your camera top hot shoe as[2-1], to lock, rotate the foxed screw of receiver hot shoe to lock.

    2. Make sure the flash is powered off, attach your flash hot shoe on the receiver hot show as [2-3] and left, your flash as [2-4]


    Test
    1. Check ig the power if on.
    2. Check the Channel and Group of both Transmitter and Receiver.

    Prodict function setup:

    Receiver Functions Display


    A/B/C group setup:

    Press[A/B/C setup button] to switch the function: Cucle Switch.
    Press [S] on tou fight to change the group function setup, you can freely choose the function you need when A/B/C group flashing one by one. ( it will auto switch to group B when you finished the setup of group A)

    When you choose TTL mode,[+] and [-] are available for you to adjust the EV from-3.0EV to +3.EV with altogether 19 leevels.

    When you choose M mode, [+] and [-] are available for you to adjust the flash power from 1/1 to 1/128 with altogether 8leverls.

    Witch to OFF will not allow you to have any set up,

    [] The use of Test button:
    Test flash button, blue lights when the channel of the device is consistet. Perss [] flast on transmitter and reciver will flash.

    [] The use of MENU button:

    Press [] can set up channel, press [] again, can set up focal length.
    Press [] again means quit


    [+] and [-] can change the channel from AUTO, CH1 to CH15 wuth altogether 16 channels.

    Focal length can be adjust by by pressing [S] buton and A/B/C from AUTO and 24 to 105MM witn altogether 8 levels.

    Main and auxillary lights setup by pressing[S], [+]and [-] buttins for the cycle switch of [MASTER] Renark : This fuction can be used after device upgarde.

    [OPT] The use of OTP button:

    Press [] to set up your flash ratio, there are A:B and A:BC 2 options.



    "A:b" Press [S]. then [+] and [-] to set up ration with a total of 15 groups to choose

    "A:bc" Press [S], then [] and [-] to set up ration and EV, For ration, there are 15 groups to choose, For EV, a total of 19 levels from -3.0EV to +3.0EV is available.

    [] The ust of OPT button:

    Press [] to setup the sunc mode, Press [] to swich the high speed sync,
    Press [] to shitch toe 2nd curtain sync, Press again will show the defalt as 1st curtain sunc.

    This instruction manual is updated at 1 Oct 2012. If you want the new relased product information after this date, you can contact the dealer or visit t http://www.dazzne.com.

  1. 윈도우10 정품인증 , 오피스 정품 인증 AAct 3.7 다운로드

    Date2018.04.10 By관리자 Views1289
    Read More
  2. 별사진 합성 별괘적 합성 Startrails 사용방법.

    Date2018.04.08 By관리자 Views183
    Read More
  3. No Image

    FileZilla_3.9.0.6_win32 포터블

    Date2018.04.07 By관리자 Views104
    Read More
  4. pdf 파일 용량줄이기 인터넷에서 설치없이 하기

    Date2018.03.03 By관리자 Views134
    Read More
  5. UltraEdit 24 Keygen 사용방법

    Date2018.01.01 By관리자 Views4623
    Read More
  6. KODY-N302 설명서

    Date2017.09.13 By관리자 Views190
    Read More
  7. mini-KMS_Activator 사용 설명서

    Date2017.02.15 By관리자 Views1610
    Read More
  8. No Image

    v3 internet security 9.0 교육기관

    Date2016.10.12 By관리자 Views1257
    Read More
  9. 안드로이드 자바 설치

    Date2016.09.26 By관리자 Views80
    Read More
  10. 안드로이드 스튜디오 설치하기

    Date2016.09.17 By관리자 Views50
    Read More
  11. Android Studio 다운로드 2.1.3.0 for Windows (1262 MB)

    Date2016.09.17 By관리자 Views69
    Read More
Board Pagination Prev 1 Next
/ 1